Description

Altair 8800 Mini + Expansion Unit bundle Special offer

 

Altair 8800 Mini The legendary Altair 8800 but in Mini version, you can place it on your desk next to your computer, the emulator is fully functional like the original! And can be programmed in binary, directly via the front switches, or, via the included micro SD card, you can load the DSK files and mount them as if there were a physical Floppy Drive.

There are many sites on the internet where you can download the image files .

It can be connected with a micro USB cable to the PC and controlled with terminal emulation software (e.g. Teraterm) or via the RS232 serial port on the back (DB9 connector), to a real serial terminal, with internale terminal (optional) or always to the PC via a USB/Serial adapter.

Now with the WiFi option

 

Characteristics:

Motherboard with 36 LEDs,

17 ON/OFF toggle switches,

8 MOM/OFF/MOM switches

Pre-programmed Arduino Due board

RS232 DB9 serial module

Micro SD Card Reader

Wifi module

Internal Terminal Card

3D print Closed Case

 

Accessories included:

Micro USB cable.

Preformatted micro SD card with various DSK files

Measures 29 x 13x 21.5 cm.

 

EXPANSION UNIT THREE IN ONE Includes:

 

Cassette Interface

Centronics Interface (Parallel Printer)

DB 25 connector (Centronics)

Jack sockets (Tape IN and Tape OUT)

Connection with Altair 8800 Mini and cascading output with other units

Led register LED register interface with LEDs on the front panel

 

Manuals and Guide:

Altair 8800 Mini User Guide

Altair Mini User GuideDownload